U264E Engine Code Repair
Meaning of U264E engine trouble code is a kind of network trouble code and when the check engine light comes U264E code on the first you should check is the gas cap. Pull over, retighten it, and take a look at the cap to see if it has any cracks in it. Continue driving and see if the check engine light turns off. Alternately, you can purchase a gas cap for about $3 at an auto parts store. All you need to do is take the old one off and screw on the new one. If you've already made it to the store, you might as well just replace it. While not car-threatening, it's good to take care of this right away to improve gas mileage.
U264E Fault Symptoms :
- Check engine light comes on
- Engine stalling or misfiring
- Engine performance issues
- Car not starting
If one of these reasons for U264E code is occuring now you should check U264E repair processes.
Now don't ask yourself; What should you do with U264E code ?
The solution is here :
U264E Possible Solution:
Air Conditioning Pressure Sensor (ACP) Insufficient Pressure Change Each time the A/C clutch engages, the PCM is looking for a pressure change in the refrigerant. If the change in pressure is outside of the calibration the DTC will set. A/C system mechanical failure Open ACP or VREF circuit A/C sensor damaged A/C system electrical failure A/C clutch always engaged Verify A/C system function, including refrigerant charge.
U264E Code Meaning :
U
OBD-II Diagnostic Network (U) Trouble Code For Engine
2
Fuel And Air Metering (Injector Circuit Malfunctions Only)
6
Fuel Composition Sensor Circuit Malfunction
4
Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
e
The poor running symptoms are consistent with a MAP sensor malfunction. In addition, in some cases, a bad MAP sensor will not throw a code. Again, the ELD code likely represents a separate wiring issue.
U264E OBD-II Diagnostic Network (U) Trouble Code DescriptionU264E engine trouble code is about .Main reason For U264E CodeThe reason of U264E OBD-II Engine Trouble Code is Fuel Composition Sensor Circuit Malfunction. |
U264E code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.